 |
|
High efficiency filter bags have been developed for demanding applications that require critical particle size retention and dirt holding capacity. They are constructed from chemically resistant Polypropylene micro fibre, which can be used in a wide range of process applications. It is the orientation of these microscopic micro-fibres in the structure, that delivers enhanced particle retention capabilities. This unique product line is available in all industry standard sizes with efficiencies up to 99.9%†.
In addition to the obvious benefits of microfibre, the key to
providing high efficiency particle retention is in the selection
and placement of media layers within the filtration structure.
It is this combination of layers in graded density that allows
us to achieve filtration efficiencies up to 99.9 %†. Inner
layers are thicker and more open, allowing excellent pre-filtration
and dirt-holding capacity. Middle and outer layers increase
in density and fineness for a "polishing" effect.
Our High E
high efficiency filter bags are configured with up to 12 different
graded density and transfer layers, which give substantial depth to
the filtration structure. The result is a high voids volume
for long service life and increased dirt holding capacity. Another
benefit of our high efficiency filter bags is their inherent
ability to remove trace amounts of hydrocarbons (oil) from fluid
streams.
| Micron | Efficiency | Size Removed |
| 1 | 99.0% | 1-2 micron |
| 2 | 99.6% | 2-5 micron |
| 5 | 99.3% | 5-10 micron |
| 10 | 99.8% | 10-15 micron |
| 25 | 99.9% | 20-30 micron |
|
POMF Configurations are available in 1, 2, 5, 10 &
25 |
||
With our High E line you enjoy the convenience of bag filtration without the expense found in other high efficiency technologies. High E provides lower operating costs while maintaining the ease of change-out that is customary in a filter bag system.
† Verified by independent laboratory testing using latex
beads yielding efficiencies up to 99.9% under controlled laboratory
conditions.
